Monday, 4 August 2014
Saturday, 1 February 2014
Friday, 10 January 2014
Monday, 6 January 2014
I.C.T PRACTICAL NO:12
Geogebra Practical 12
The Percentage of Literate males between the ages of 15 to 45 in a colony is given in the table below. |
Class
|
15-20
|
20-25
|
25-30
|
30-35
|
35-40
|
40-45
|
Percentage
|
42
|
38
|
35
|
26
|
16
|
5
|
Draw a Histogram and Frequency Polygon.
|
1. Open Geogebra. From the ‘Options’ Menu click ‘Advanced.’ See Figure 1 below. Select ‘Preferences -- Graphic’.
|
Figure 1.
|
2. Click on x-axis Tab and click on Label. Enter 'Age' as label. See Figure 2 below.
|
Figure 2.
|
3. Click on Y-axis Tab and click on Label. Enter ‘Percentage’ as label. See Figure 3 below.
|
Figure 3.
|
4. Click on Grid tab. Select show Grid. Enter grid distance as ‘2.5’ for x-Axis. See Figure 4 below.
|
Figure 4.
|
5. In the Input Box at the bottom of the Screen type, histogram[{15,20,25,30,35,40,45}, {42,38,35,26,16,5}] and press Enter. The required Histogram will be displayed. Use the Mouse Scroll button and the Move Graphics View Tool from Tool 11 to position the graphics area properly, as shown in figure 5 below.
|
Figure 5.
|
6. Click on Tool 2 and Select ‘Segment between two points’, as shown in Figure 6 below.
|
Figure 6.
|
7. Click on x-Axis at 12.5 and then on each class mark on the top of the histogram. Click on 47.5 on the x-Axis to complete the Frequency Polygon. The required Frequency Polygon will be obtained. In the Algebra section under Points, click on the green buttons indicating the points. This will remove the labeling of the points from the Frequency Polygon. See Figure 7.
|
Figure 7.
|
Save or Print your file as required.
|
I.C.T PRACTICAL NO:11
Geogebra Practical 11
Verify the theorem: If two circles are touching circles then the common point lies on the line joining their centers.Circles could either touch Internally or Externally. Case 2. Circles touching Internally. |
1. Open Geogebra. Click on Tool No 5 and select ‘Circle with center through point’. See Figure 1. |
Figure 1
|
2. Click at any place in the Graphic Area where you want center ‘A’ of the first circle. Drag your mouse away from the center until you see a circle of appropriate size. Click to get point ‘B’. See Figure 2.
|
Figure 2
|
3. Click on any point ‘C’ in the graphic areainside the first circle where you want the center of the second circle. Drag outward until the two circles are just touching internally. Click to get point ‘D’. See Figure 3. |
Figure 3
|
4. Click on Tool No 2 and select ‘Line between two points’. See Figure 4. |
Figure 4
|
5. Click on ‘A’ followed by ’C’. See Figure 5. |
Figure 5
|
6. Click on Tool 1 and select ‘Point on Object’. See Figure 6. |
Figure 6
|
7. Click anywhere on Line AC. A New Point ‘E’ will appear where you have clicked. See Figure 7. |
Figure 7
|
8. Drag the point ‘E’ till it lies on the point where the two circles touch other. See Figure 8 |
Figure 8
|
9. Click on Tool 7 and select ‘Distance or Length’ Tool. See Figure 9 |
Figure 9
|
10. Click on Point ‘A’ followed by point ‘E’. Click on Point ‘E’ followed by point ‘C’. Click on Point ‘A’ followed by point ‘C’. See Figure 10. 11. In the Algebra Section verify that length(AE) = length(AC) + length(EC). This proves that A-C-E, i.e., the point of contact of two touching circles lies on the line joining their centers. |
Figure 10
|
I.C.T PRACTICAL NO:10
Geogebra Practical 10
Verify the theorem: The measure of an angle subtended by an arc at a point on the circle is half the measure of the angle subtended by the same arc at the center. |
1. Open Geogebra. Select Tool No 5 and click on ‘Circle with center through point’. See Figure 1. |
Figure 1
|
2. Click on any point ‘A’ where you wish the center of the circle to be. Move your mouse away from the center and you will observe a circle. Click (point ‘B’) when you have a circle of appropriate size. See Figure 2. |
Figure 2
|
3. Click on Tool 1 and select the ‘New Point Tool’. See Figure 3. |
Figure 3
|
4. Click on two points ‘C’ and ‘D’ on the circle as shown. See Figure 4. |
Figure 4
|
5. Click on Tool 2 and select ‘Segment between two points’ tool. See Figure 5. |
Figure 5
|
6. Click on Point ‘A’ followed by ‘B’. 7. Click on Point ‘A’ followed by ‘C’. 8. Click on Point ‘D’ followed by ‘B’. 9. Click on Point ‘D’ followed by ‘C’. The result should now look like Figure 6 |
Figure 6
|
10. Click on Tool 7 and select the ‘Angle’ tool. See Figure 7. 11. Click on Points ‘C’, ‘A’ and ‘B’ one after the other. The angle CAB will be marked out. 12. Click on Points ‘C’, ‘D’ and ‘B’ one after the other. The angle CDB will be marked out. |
Figure 7
|
13. In the Algebra Section, the Angles CAB and CDB will be indicated as ‘α’ and ‘β’ respectively. See Figure 8. Verify that α = 2xβ 14. Save or print your file if required. |
Figure 8
|
I.C.T PRACTICAL NO:9
Geogebra Practical 9
Find the mean, median and mode of the following data: 11, 25, 28, 37, 65, 47, 58, 59, 78, 14 |
1. Open Geogebra. In the Input Box at the bottom of the Geogebra Window type Mean[11,25,28,37,65,47,58,59,78,14]. Press Enter. |
Figure 1
|
2. In the Algebra section under the Number tab mean will be displayed as a = 42.2 |
Figure 2
|
3. In the Input Box at the bottom of the Geogebra Window type Median[11,25,28,37,65,47,58,59,78,14]. Press Enter. |
Figure 3
|
4. In the Algebra section under the Number tab median will be displayed as b = 42 |
Figure 4
|
5. In the Input Box at the bottom of the Geogebra Window type Mode[11,25,28,37,65,47,58,59,78,14]. Press Enter. |
Figure 5
|
6. In the Algebra section under the List tab Mode will be displayed as list1 = { } |
Figure 6
|
7. Save your file if required. |
I.C.T PRACTICAL NO:8
Geogebra Practical 8
Draw a regular polygon with 6 sides using ‘polygon’ tool in Geogebra. |
1. Open Geogebra. Click on Tool No 4 and select “Regular Polygon.” 2. Click at any place in the Graphic Area where you want one end point ‘A’ of one side. 3. Click on another place in the graphic area where the other end of the first side (point B) should be. |
Figure 1
|
4. In the box that appears type in the required number of sides of the polygon. (e.g., 6) and click OK. |
Figure 2
|
5. The polygon having 6 sides will be drawn. 6. Save your file or print it if required. |
Figure 3
|
I.C.T PRACTICAL NO:7 (2)
Geogebra Practical 7 -(ii)
Draw an angle of 133o and bisect it. |
1. Open Geogebra. Click on Tool No 7 and select ‘Angle with given size’. See Figure 1. 2. In the Graphic area click on any place where you want one arm (Point ‘A’) of the angle to be. |
Figure 1
|
3. Click on any other point where you want the vertex to be. (Point ‘B’) 4. In the box that comes up enter the measure of the angle that you want e.g., 133o. See Figure 2 |
Figure 2
|
5. Click OK. The angle of the required measure will be drawn. See Figure 3. |
Figure 3
|
6. Click on Tool 2 and select ‘Segment through two points’. See Figure 4 |
Figure 4
|
7. Click on the points A followed by B. Then click on the points B followed by A’. 8. The given angle will be drawn. See Figure 5. |
Figure 5
|
9. Select Tool 3 and click on ‘Angle Bisector Tool’. See Figure 6. |
Figure 6
|
10. Click on points A followed by B and A’. The required angle bisector will be drawn. See Figure 7. 11. Save and print your file if required. |
Figure 7
|
I.C.T PRACTICAL NO:7 (1)
Geogebra Practical 7 -(i)
Draw a line segment of length 6.5 cm and draw its perpendicular bisector. |
1. Open Geogebra. Click on Tool No 2 and select “Segment of Fixed Length.” See Figure 1. 2. Click at any place in the Graphic Area where you want one end point ‘A’ of the segment. |
Figure 1
|
3. In the box that appears type in the required length. (e.g., 6.5) cm. and click OK. See Figure 2. 4. The segment AB of required length will be drawn. |
Figure 2
|
5. Click on Tool No 3 and select “perpendicular bisector of segment” Tool. See Figure 3. |
Figure 3
|
6. Click on the point ‘A’ followed by ‘B’. The perpendicular bisector of Segment AB will be drawn as shown. See Figure 4. 7. Save your file or print it if required. |
Figure 4
|
Subscribe to:
Posts (Atom)





























